Large-scale industrial projects are the result of close cooperation between numerous specialised suppliers, each contributing its expertise to the final solution.

For the Porsche Smart Battery Shop in Horná Streda, iPIC solutions supplied Firelock DUO roof ventilators together with Louvre Windows façade systems for the technology centre, covering Phases I and II of the project.

The delivered solution was tailored to the facility’s technical requirements and combined roof-mounted and façade-integrated systems within a single project.

We appreciate the trust placed in us and the opportunity to contribute to one of Slovakia’s key investments in the field of electromobility.

Firelock Louvre is more than just a ventilation louvre. Depending on the project requirements, a single device can combine:

• natural daily ventilation,
• daylight entry through transparent polycarbonate lamellas,
• smoke and heat exhaust in accordance with EN 12101-2.

By combining ventilation, daylighting, and smoke extraction capabilities, Firelock Louvre offers a multifunctional solution for modern buildings.

With a geometric opening area of up to 7.48 m² and aerodynamically optimised lamellas, the system is designed for demanding industrial and commercial applications.

For SEOYON E-HWA, a major supplier to the automotive industry, iPIC solutions delivered and installed Firelock Louvre façade louvre systems designed for the natural ventilation of production areas.

The Firelock Louvre system enables efficient natural air exchange and is well suited for industrial facilities with demanding operational and indoor-environment requirements.

Depending on the specific project requirements, Firelock Louvre can also be designed as a smoke and heat exhaust device in compliance with EN 12101-2.

We appreciate the trust placed in us and the opportunity to contribute to another successful project within the Slovak automotive industry.

No, the number of devices is not determined solely by the size of the building.

Two halls may have similar dimensions yet require a completely different number of smoke and heat exhaust ventilators.

The design depends on several factors, including:

• the building’s fire load,
• fire compartmentation,
• building height,
• the required aerodynamic free area A_a,
• fire safety engineering requirements,
• applicable national fire safety regulations.

The required number of devices must therefore always be determined individually according to the building’s specific fire safety concept, operating conditions, and the technical requirements applicable in the country where the system is installed.

These devices are not intended to extinguish a fire. Their primary function is to remove smoke and heat, support the safe evacuation of occupants, improve visibility and tenability conditions within the building, and facilitate firefighting operations.

Consequently, two buildings that appear very similar may require significantly different numbers of smoke and heat exhaust ventilators on their roofs.

Firelock MONO devices are not limited to industrial and logistics facilities.

For the COOP Jednota Kočovce retail building, iPIC solutions delivered a natural smoke and heat exhaust system integrated directly into the rooflights.

In the event of fire, Firelock MONO supports the removal of smoke and heat, helps maintain conditions for safe evacuation, and facilitates firefighting operations.

At the same time, the system can also be used for daily natural ventilation and interior daylighting.

This project demonstrates the versatility of Firelock MONO and its suitability for a wide range of commercial and public buildings.

In mechanical smoke and heat exhaust systems, reliability is essential, especially under extreme fire conditions.

That is why the iPIC solutions portfolio also includes FireFans, designed for mechanical smoke and heat extraction in industrial facilities, logistics centres, commercial buildings, and underground parking garages.

The fans are available with the following classifications:

• F300,
• F400 according to EN 12101-3.

The product range includes solutions for both horizontal and vertical smoke transport and is designed for the efficient extraction of hot combustion gases.

Mechanical smoke and heat exhaust systems are an important part of a building’s fire safety infrastructure. They help create conditions for safe evacuation and support firefighting operations during fire localisation.

Installation of Firelock MONO natural smoke and heat exhaust devices is continuing at the LogisOne Park Košice project in Valaliky.

The first section of Building E has been completed, while Buildings C and G are currently under construction.

LogisOne is one of the most significant industrial and logistics developments in eastern Slovakia. Located directly next to the new automotive production plant, the project will deliver extensive manufacturing and logistics capacity focused on modern technologies, sustainability, and efficient operation.

As part of the project, iPIC solutions is supplying Firelock MONO devices designed for natural smoke and heat exhaust in the event of fire, while also supporting the daily ventilation of the buildings.

As the individual halls continue to grow, so does the scale of the technical systems required to ensure their safe operation.

CTP continues to expand its industrial and logistics capacity in Prešov. Alongside the existing CTPark Prešov South, the new CTPark Prešov North project further strengthens the region’s position as an important logistics and industrial hub in eastern Slovakia.

For one of the industrial buildings, iPIC solutions delivered a mechanical smoke and heat exhaust system designed for the safe removal of smoke and combustion products in the event of fire.

The end user of this facility is DE JONG Prešov — home to Europe’s most modern and largest production plant for stainless steel water tanks for heat pumps, as well as the only fully automated production facility of its kind in Europe.

Projects of this type require reliable technical solutions, precise coordination between disciplines, and high-quality on-site execution.

We value the opportunity to participate in projects that continue to raise the standard of modern industrial and logistics buildings.

Triblavina Logistics Center in Bernolákovo is one of the key logistics developments located directly next to the D1 motorway between Bratislava and Trnava.

Thanks to its strategic location near the Triblavina exit, the complex is designed for logistics, warehousing, and light industrial production, with a focus on efficient operation and modern technical solutions.

As part of the Logistic Park Triblavina – Hall C project, iPIC solutions provided:

• design of the smoke and heat exhaust system,
• delivery of the devices,
• installation of the NSHEV system.

The project utilised Firelock DUO devices designed for natural smoke and heat exhaust in industrial and logistics buildings.

The double-flap solution provides high aerodynamic efficiency while allowing seamless integration into modern roof systems for large-span facilities.

Fire safety is not about assumptions, but about numbers.

At iPIC solutions, we do not deliver just devices. We deliver verified performance defined by EN 12101-2.

For designers and fire safety engineers, the key parameters include:

• A_a — aerodynamic free area, which determines the real efficiency of smoke extraction,
• Re 1000 / 10,000 classification, which expresses the reliability of opening in critical situations,
• SL and WL resistance, designed for real snow and wind loads.

In a project, it is a technical element. In reality, it is a system that must work immediately when it matters most.

We have reorganised our portfolio of smoke control, daylighting, and ventilation solutions to make it clearer and easier to navigate.

You can now find in one place:

• natural smoke and heat exhaust systems,
• rooflights and ventilation systems,
• smoke barriers,
• fire fans,
• pressurisation systems.

The goal is simple — to make it easier for designers, partners, and investors to quickly find the information they need.

Our work does not end when the project is handed over.

Once fire safety systems are commissioned, regular servicing and functional inspections become an essential part of ensuring their reliable operation throughout the system’s service life.

At the Winkelmann production plant in Rimavská Sobota, iPIC solutions carried out the first post-handover service inspection of the installed Firelock LOUVRE and Firelock DUO systems.

The service included checking the operation of the devices, actuators, control components, and the overall functionality of the system to verify that it continues to perform in accordance with the project requirements.

Service and technical support are an integral part of the solutions we provide throughout the entire lifecycle of our systems.

Thank you for your continued trust.

We are starting work on one of the most significant projects of the year.

iPIC solutions is participating in the LogisOne Valaliky project for the developer Sibareal, providing a complete natural smoke and heat exhaust solution — from system design through to installation.

During the first phase, more than 600 Firelock MONO devices will be installed, forming a key part of the system for the safe removal of smoke and heat in the event of fire.

We appreciate the investor’s trust and the opportunity to contribute to a project that represents an important logistics hub in the region while placing high demands on fire safety technology.

We thank our partner Sibareal for the cooperation and will continue to share updates as the project progresses.

Do you design in BIM? We have great news. Our FIRELOCK DUO device now has its own parametric Revit family.

BIM (Building Information Modelling) is a digital 3D model in which every element is defined not only by geometry but also by structured data. Each component becomes a parametric object with clearly defined geometry and properties.

• accurate 3D geometry according to the required LOD,
• technical parameters and performance data,
• classification and shared parameters,
• defined clearance zones for coordination.

Our stand remained busy throughout the exhibition, and we were delighted by the strong interest in our solutions. Thank you to everyone who stopped by — we are leaving full of energy and inspiration for the work ahead.

We are ready for new challenges. Meetings with professionals from around the world once again confirmed that the quality of our solutions meets international standards.